Ivoclar Vivadent Stratos 300 User Manual
Page 10
4.1
Unpacking and checking the contents
Remove the components of the Stratos 300 from their packaging
and check the delivery for completeness.
Stratos 300 basic model:
1 x
Stratos 300
1x
Incisal plate 0°
1x Incisal
indicator
2x
Retentive base blocks
1x
Plaster protection plate
1x
Incline support holder
If certain parts are missing or damaged, contact your local Ivoclar
Vivadent Customer Service. We recommend keeping the original
packaging for possible future transportation purposes.
4.2
Assembly and initial set-up
Incline support holder
The incline support holder enables ergonomic handling of the
articulator. If mounted, it maintains the articulator at approx. a
45° angle. This position permits a superb overview of the model
mounted in the articulator.
Insert the incline support holder (7.2) into the holding device (7.1)
for the incline support holder. If necessary, the incline support hol-
der can be removed from the apparatus.
Secure the base block (33) to the articulator by means of the GI
knurled screw (2.1).
5.1
Centric position
The Stratos 300 features a precise centric locking system that can
be activated in the following positions:
5.1.1 Centric fixation (4.1) open
This position permits the simulation of jaw movements.
If the rubber bands (4.2) are removed, the two frames can be
separated.
10
4.2
5. Handling and Operation
4. Installation and Initial
Start-up
4.1
7.2
7.1
Stratos 300-BA-WE1.qxd 03.05.2004 11:12 Uhr Seite 10