Ivoclar Vivadent P300 - Manual (Page 8)

8
1. Introduction / Signs and Symbols
1.1 Preface
Dear Customer
Thank you for having purchased
the Programat P300/G2. It is a
state-of-the-art furnace for
dental applications.
The furnace has been designed
according to the latest industry
standards. Inappropriate use
may damage the equipment and
be harmful to personnel. Please
observe the relevant safety
instructions and read these
Operating Instructions carefully.
Enjoy working with the
P300/G2.
1.2 Introduction
The signs and symbols in these
Operating Instructions facilitate
the finding of important points
and have the following
meanings:
Risks and dangers
Important
information
Contraindication
Burn hazard
Risk of crushing
The Operating
Instructions must
be read.
1.3 Notes regarding the
Operating Instructions
Furnace concerned:
Programat P300/G2
Target group:
Dental technologists
These Operating Instructions
facilitate the correct, safe and
economical use of the
Programat P300/G2 furnace.
Should you lose the Operating
Instructions, extra copies can be
ordered at a nominal fee from
your local Ivoclar Vivadent
Service Centre or downladed
from www.ivoclarvivadent.com.
1.4 Notes on the different
voltage versions
The furnace is available with
different voltage versions.
– 110–120 V / 50–60 Hz
– 200–240 V / 50–60 Hz
In the Operating Instructions,
the furnace is described in the
200-240 V voltage version.
Please note that the voltage
range shown on the images
(e.g. rating plate) may differ
depending on the voltage
version of your furnace.