Insinger Ensign 40-2 - Manual (Page 4)

PART 1 TECHNICAL INFORMATION
®
www.insingermachine.com 800-344-4802
3M 0808 PRINTED IN USA
Information and specifications subject to change without notice
Note: For all rough in connections see Installation and Layout Detail Drawing.
SPECIFICATIONS
CONSTRUCTION -
Hood and tank constructed of 16 gauge 18-8 type 304 S/S. Hood unit of all welded seamless
construction. All internal castings are non-corrosive lead free nickel alloy or bronze.
DOORS - Two opening operating doors. Operating doors have fingertip control, rotating on S/S bracket. Doors formed of
18 gauge S/S.
PUMP - Centrifugal type “packless” pump with a brass petcock drain. Construction includes ceramic seal and a balanced
cast impeller on a precision ground stainless steel shaft, extension or sleeve. All working parts mounted as an assembly and
removable as a unit without disturbing pump housing. One 1/2 HP motor, standard horizontal C-face frame, drip proof, internally
cooled with ball-bearing construction.
CONTROLS - Side-mounted control cabinet, housing motor controls and overload protection, transformer, contactors
and all dishwasher integral controls. All controls safe low voltage 24 VAC.
SPRAY SYSTEM - Wash and rinse spray systems made of 18-8 type 304 S/S pipe.
WASH - Power wash arm above with 14 high pressure action cleansing slots and 6 power wash arms below, each designed
with 5 high pressure action cleansing slots. The slots are precision milled for water control producing a fan spray. Wash arms
are removable without the use of tools.
FINAL RINSE - 1 spray body above designed with 4 power rinse nozzles and 1 power rinse coil below designed with
6 nozzles.
DRAIN - Overflow assembly with skimmer is removable without use of tools for drain line inspection. Heater protected by low
water level controls.
Capacity
per hour
Final rinse
consumption
at 20 psi min.
Exhaust hood
requirement
Peak rate
drain flow
Shipping
weight
Current draw
amps
Steam Electric
w/o booster
Tank capacity Motor size Electric usage Final rinse
peak flow
at 20 psi min.
43 racks
720 dishes
34 gals./hr.
0.75 gals./rack
N/A
9 gals./min. 400 lbs.
8.1 gals. 1/2 hp (wash)
1.5 kw wash tank
6 kw booster 40° rise
12 kw booster 70° rise
6 lbs./hr tank
22 lbs./hr rem. booster 40° rise
43 lbs./hr rem. booster 70° rise 4.1 gals./min.
Steam consumption
at 20 psi min.
115/1/60 ................... 10.7 .................... 24.0
208/3/60 .....................2.9 ...................... 7.1
240/1/60 .....................5.6 .....................11.3
240/3/60 .....................2.6 ...................... 6.2
380/3/50 .....................1.6 ...................... 3.9
480/3/60 .....................1.4 ...................... 3.1
ENSIGN 40-2
CSI
- 1
1400
2 Ensign_40-2_TM2009