Insinger Ensign 40-2 User Manual
Page 12
®
www.insingermachine.com 800-344-4802
10
CLEANING PROCEDURES (continued)
NOTE:
Improper cleaning of the suction strainers
will cause the pumps to cavitate. This will
cause poor washing results.
9. Clean the tank level float with a plastic abrasive pad
(do not use steel wool).
CAUTION:
Level floats must be cleaned daily.
Build-up of grease and dirt will cause faulty operation
of the tank fill heating system.
10. Final rinse nozzles should be cleaned of matter
clogging the jet spray.
11. The doors should be left open to allow drying of
interior surfaces.
PART 3 OPERATION & CLEANING INSTRUCTIONS
Ensign_40-2_TM2009