Customizing communication settings – Dynalink ALE800 User Manual

Page 20

Accessing Communication Settings on Windows

Once the USB ADSL Modem and software have been installed, the

communication settings may be easily updated by performing the following steps:

1. From your PC desktop click Start

Programs

DSL Modem

Configure.

2. The Communication Settings window will be displayed.

Make the necessary changes to the VPI, VCI, Encapsulation type and/or

Modulation type and click Next.

3. The system must be rebooted to have the new settings take effect, therefore

the Reboot window will appear. Remove all disks from their drives, select

Yes, reboot the computer now; and click Close to reboot.

Customizing Communication Settings