Dynalink ALE800 - Manual (Page 12)

11
The software installation procedures vary depending upon the operating system
of your PC. Be sure to follow the instructions provided for the operating system
appropriate for you.
Before you start…
The following information may be required for software installation. Contact your
DSL service provider before proceeding with software installation.
IP Address Settings
The software installation process allows the server to dynamically assign
IP Address settings. If your application requires static setting of specific
address information you will need to know:
IP Address
Subnet Mask (for Bridged Ethernet applications only)
Default Gateway (for Bridged Ethernet applications only)
Name Server Information
The software installation process allows the server to dynamically assign
Name Server Address settings. If your application requires static setting of
specific address information you will need to know:
Primary DNS Address
Secondary DNS Address
Primary WINS Address
Secondary WINS Address
Type of Driver to be installed
WAN, LAN and ATM software drivers are supported.
Note: Required if not using default value
Software Installation