Pt3000_p4, Assembly instruction, Pt3000 – ikan PT3000 User Manual

Page 5

Install 4 x T-plates (Part C) and 8 x Long Phillips Head screws (Part G) onto the Metal frame with Prompter Glass (Part L).

Then, slide the Prompter Glass assembly onto the completed Teleprompter frame. Refer to the diagram below.

Attach your camera to the Metal Bracket on the 20” T-slot. To do so, first loosen each screw on the metal bracket and slide

it off the T-slot. Then, use either the ¼-20 or the 3/8 screw to attach your camera to the metal bracket (Some cameras may

require a washer or other spacer in order to fit snugly).

ASSEMBLY INSTRUCTION

PT3000

15” TELEPROMPTER

ikancorp.com

Washer (Not included)

** Some cameras may require
an extra spacer, such as a
washer, in order to fit snugly.

Part-E or Part-F

(depends on your camera)

ikancorp.com

> Install 4 x Part-C on Part-L and

secure with 8 x Part-G (Place the

Part-C on the inner sides)

Part-Q

Part-C

Part-G

Part-L

> Loosen the screws and slide out the Metal Bracket

through the channels

4 of 10

This manual is related to the following products: