F.a.q, Ikan pt3000 teleprompter – ikan PT3000 User Manual

Page 11

F.A.Q.

ikan PT3000 TELEPROMPTER

Q: I have assembled my PT3000 and I have some parts left over. What do these belong to?

A: First, you can double-check the assembly of the PT3000 to verify that each piece is in its correct placement.

Then, you can refer to the parts listing. There are two (2) larger pieces included which are “Optional” bracketry

and not necessary for the operation of the PT2100. These are the 8” T-Slot with Metal Bracket and an additional

100mm Mounting Bracket. These pieces are included as a convenience to the user (8” T-Slot) and as an extra

Mounting Bracket should you wish to attach a counterweight.

The User Guide can take you through the process of assembling the 8” T-slot with Metal Bracket.

Part R can be mounted once the entire assembly has been built. It will slide on to the end and can serve as a

counter-balance for the rear of the teleprompter.

_______________________________________________________________________

Q: Will my PT3000 work with Professional Battery Packs, such as Anton Bauer, V-Mount of the Ikan Batteries?

A: No. Currently, the monitors used for the PT3000 do not support the voltage carried by the Pro Battery Packs.

_______________________________________________________________________

Q: How do I flip the image on my PT3000 monitor?

A: There is a detailed instruction sheet to flip the image on the PT3000 monitor which can be downloaded at

www.ikancorp.com.

_______________________________________________________________________

Q: How do I set-up my computer for the PT3000?

A: There is a detailed Quick Start Guide which can be downloaded at www.ikancorp.com with instructions on

setting up your computer for the PT3000.

10 of 10

This manual is related to the following products: