ikan KVF-1730W - Manual (Page 6)

Shenzhen Konvision Technology Co,.Ltd www.konvision.com
6
The following does not belong to failures:
1. If the static image displayed too long, it will have residual image, which should be
attributed to the characteristics of LCD display but not a failure. Residual image will
disappear automatically after a period of time.
2. If this device used in a cold environment, the screen may appear residual image.
This is not a product failure, when the monitor temperature changes, screen will
return to normal conditions.
3. LCD screen may appear tiny spots (red, blue or green), this is not a fault, LCD
screens are manufactured with high precision technology, and a small number of
pixels may not be able to show intermittent.
4. Lightly vibration when you touch the monitors.
5. Screen and cabinet will become warm gradually during operating.
6. When it appears cracked sound
7. When it appears sound of mechanical vibration.
●Features
High resolution LCD panel
- LED backlight and high resolution. High contrast, high-speed response and wide
viewing angle technology make the monitor can be used under variety of lighting
conditions.
Lightweight design
- Reduce installation space and load for OB vans, etc.
High brightness LED Tally Indicator
- Two colors Tally indicator as red and green, to monitor each input signal and check
ON-AIR mode .
Color system (PAL, NTSC, SECAM)
- This unit detects the color system automatically.
3D video decoder