ikan VX9e - Manual (Page 3)

www.ikancorp.com 713-272-8822
POWERING THE MONITOR
1. Plug the AC power adapter into the power input jack (See rear view diagram or above).
2. Attach the DV battery plate on the slot, and connect DV battery to the plate.
3. Connect a pro battery using the optional pro battery plate and then plugging that plate with the power tap cable into
the DC-In connector. The pro battery plate kits (PBK17-S or PBK17-A) allow you to go into the field using standard
V-Mount or Gold-Mount batteries.
DIGITAL TO ANALOG CONVERSION [SDI > YUV]
The monitor can convert digital SDI signals to Analog YUV. A signal from the SDI will be displayed on the YPbPr analog
outputs. This is a straight digital to analog conversion only. There is no up converting, down converting or standards
conversion available in this feature. This feature works in one direction SDI to analog. It will not work in reverse.
6 7
+
+
CAUTION: TURN OFF POWER
BEFORE ADJUSTING
SWITCHES
VIDEO
Y/C
Y
Pb
Pr
SDI
IN
DC 12V-20V
DC 12V - 20V
OUT
HDMI
+ +
1 HDMI terminal
HDMI input only
VIDEO terminal (BNC)
IN
: Composite signal input terminal
OUT: : Input signal through-out terminal
Y/C terminal
IN
: SVHS signal input terminal
OUT: : Input signal through-out terminal
YPbPr terminal (BNC)
IN
: Component signal input terminal
OUT: : Input signal through-out terminal
SDI (HD/SD) terminal (BNC)
IN
: SDI input terminal - 1.5G
OUT: : Input signal through-out terminal (Reclock)
DC 12V-20V power terminal
Standard DC Connection
DC 12V-20V power terminal
XLR DC Connection
Vesa 100mm Mount Holes
Threaded for
M4x.07 screws. Use to attach pro battery
plate adapter or for mounting third party vesa mounts.
USB terminal
For factory service use only
¼-20 Threaded insert (on four sides of monitor)
Mounting Monitor
DV Battery Plate Slot
Mounting ikan DV battery plate
2
3
4
5
6
7
8
9
11
10
1
2
3
4
5
6
7
8 9 10 11
11
**NOTE – The user must turn the
monitor off before making changes to
the DIP switches. Failure to do so may
damage the monitor or make the
monitor unusable.
VX9e
8.9" HD-SDI Field Monitor QUICKSTART GUIDE