IHSE USA R434-91 Series SDLink Rackmount Hubs - Manual (Page 18)

16 CATx KVM Extender Range
Figure 2 Single/Dual Head Remote Unit – rear view
Status Yellow LED* Green LED
OFF
ON
FLASHING No data transfer with Local
Unit
Remote Unit in Command
Mode
Data transfer with Local Unit
Remote Unit not powered.
Remote Unit powered but no
video found
Remote Unit powered & video
sync found
* Yellow LED active on primary INTERCONNECT socket (Channel 1) only
Figure 3 Single/Dual Head Remote Unit - front view
Connect to
Primary
monitor. Connect PS/2
keyboard and
mouse. Connect to second monitor.
Connect to speakers and
microphone. Connect to serial device, for
example, a touch screen.
Connect
approved 9V
power supply.
SDBX/RA1, SDBX/RA2, SDBX/SA1, SDBX/DA1, SDBX/SA2 only
SDBX/R2, SDBX/RA2,
SDBX/S2, SDBX/SA2 only
All SDBX Remote Units
INTERCONNECT 1 – carries
primary video and data signals.
Connect to INTERCONNECT Port
1 on Local Unit using CATx cable. INTERCONNECT 2 – carries
secondary video signals. Connect
to INTERCONNECT Port 2 on
Local Unit using CATx cable.
All SDBX Remote Units
SDBX/S2, SDBX/SA2,
SDBX/R2, SDBX/RA2 only