IHSE USA 434 Series SD- VUE/5x - Manual (Page 17)

Installation 15
Figure 2 Remote Unit – rear view
Status Yellow LED* Green LED
OFF
ON No data transfer between Local
and Remote Units: not connected,
or Remote Unit not powered
Integral USB Hub functioning
correctly (enumerated and not
suspended).
Remote Unit not powered, or in
an over-voltage (>6.0V
condition
Remote Unit powered
* Yellow LED active on primary INTERCONNECT socket (Channel 1) only
Figure 3 Remote Unit - front view
Connect to
USB
devices. Connect
supplied 5V
PSU.
Connect to second monitor.
Connect to speakers and
microphone. Connect to serial device, such as a
touch screen.
SD-VUE/50A and SD-VUE/52A only
SD-VUE/52, SD-VUE/52A only
All Remote Units
INTERCONNECT 1 – carries
primary video and USB signals. INTERCONNECT 2 – carries secondary video
signal and/or audio/serial data.
All Remote Units SD-VUE/50A, SD-VUE/52, SD-VUE/52A only
Connect to
primary
monitor.