IHSE USA 473 Series DSXi KVM Extender - Manual (Page 23)

Configuration
2011-02-23
23
5.1.2 Adjustment of Cable Length
The CON Unit can be adapted for the current interconnect cable length
with the following DIP switch settings:
CON Unit
DIP Function
Switch
Position
Switch down Switch up Not used
Automatic adjustment (default)
Cable length exceeds 10 m
Cable length exceeds 20 m
Maximum cable length: Use this setting if you are exceeding
the maximum recommended cable length or if the video
quality is not acceptable with automatic adjustment.
Cable lengths refer to Cat X solid-core cable type AWG24.
Using flexible stranded cables (patch cables) of type AWG26/8 is possible,
however the maximum possible extension distance is halved.
 Change your DIP switch settings.
Pos: 22 /806-IHSE/Konfiguration/DDC-Einstellungen/473-xx @ 5\mod_1278577797886_6.doc @ 41988 @ 2