IHSE USA 473 Series DSXi KVM Extender - Manual (Page 22)

DSXi KVM Extender
22
2011-02-23
5 Configuration
Pos: 21 /806-IHSE/Konfiguration/Übertragungsparameter/73-xx @ 5\mod_1278575636042_6.doc @ 41864 @ 233
5.1 Transmission Parameters
By default, the device will automatically adapt to optimize video quality.
This configuration is suitable for almost all conditions and should only be
modified if video quality is not satisfactory.
In case of video interference, an automatic readjustment can be initiated
by entering a keyboard command (see Chapter 6.1, Page 27). Please
note that this feature is not available on model K473-SST.
5.1.1 Adjustment of Video Resolution
The CPU Unit can be adjusted for the video resolution used with the
following DIP switch settings:
CPU Unit
DIP Function
Switch
Position
Switch down Switch up Not used
Automatic adjustment (default)
Resolution up to 1280x1024
Resolution greater than 1280x1024
Configuration for maximum distance transmission,
independent of monitor resolution