IBASE IBD185 - Manual (Page 9)

IBD185 User Guide 9
1.3 Command and Reply Codes
1.3.1 Summary
Code Value Description
GET_FIRMWARE_VERSION 0x80 Get MCU Firmware Version
GET_GPIO_CONFIG
0x8A Get GPIO configuration
SET_GPIO_CONFIG 0x8B Set GPIO configuration
GET_GPIO_STATUS 0x8C Get GPIO Status
SET_GPIO_STATUS 0x8D Set GPIO Status
I2C_API_COMMAND 0x8E I2C Bus Interface Command
The command 0xF0 ~ 0xFF is the reserved command for
instruction controller.
1.3.2 Get Mcu Firmware Version
Read version number of the MCU firmware
Request
Header Size Command Data CRC
0xFF
0xEE
0x00 GET_FIRMWARE_VERSION None
Reply
Header Size Command Data CRC
0xFF
0xEE
Size of
Version
structure
GET_FIRMWARE_VERSION Version
structure
Version Structure
Field Type Description
Major version byte Major version number
Minor version byte Minor version number
Build byte Build number