Hypertherm HD4070 Rev.8 - Manual (Page 61)

INSTALLATION
0
3-20 HD4070 Instruction Manual
A3
Install the Remote Display Cable
Caution: The HD4070 system can only support
one touch screen display, either local
or remote. Installing displays at both
locations on one system may cause
malfunctions or damage.
Installation Note
1 – Mark the identification number
on the end of the cable.
2 – Instructions to install the remote display
are included with the applicable remote
display kit.
Remote Display
Part No. Length
123476 6 ft (2 m)
123481 10 ft (3 m)
123482 20 ft (6 m)
123018 25 ft (7.5 m)
123484 30 ft (9 m)
Part No. Length
123485 40 ft (12 m)
123019 50 ft (15 m)
123487 75 ft (23 m)
123488 100 ft (30.5 m)
123489 150 ft (46 m)
RUN LIST – Power Supply to Remote Display Cable
1X4 COLOR Display
5 Black 5
9 Red 9
8 N/C* 8
7 N/C 7
4 N/C 4
3 White 3
6 Black 6
2 Green 2
1 Black 1
* Not connected
1X4 Female End
A1
Signal Cable – Power Supply to Remote Display A2
Ground Wire
4070.52
A1
Display
1X4
A 2
Ground to Chassis
A3
Female end
(Sockets)