Firmware update – Honestech nScreen Deluxe User Manual
Page 39
nScreen
™ Deluxe 39
8.3. Firmware Update
The nScreenBOX™ firmware can be updated if a firmware update is available. You can visit
to see if a firmware update is available. Follow the instructions
below to update the firmware.
1)
Go t
2)
Click the download link to download and save the firmware files (*.bin and *.inf) onto a
USB memory stick. **The firmware files must be saved to the root or top directory of the
USB memory stick (not inside a folder). The root directory is the top-level directory
represented by a backslash (\), as in F:\ or G:\.
3)
Connect the nScreenBOX™ to a TV/projector.
4)
Plug the USB memory stick into the USB port on the back of the nScreenBOX™.
5)
Push in the Power button to turn on the nScreenBOX™, and wait until you see the
startup (white & green) screen on your TV/projector.
6)
Using a pointed tool or object, press and hold the reset switch until your TV/projector
screen turns black (takes approximately 10 seconds).
The
nScreenBOX™ firmware will be updated once the nScreen™ startup screen appears on
your TV/projector.