Hoefer SE250 - Manual (Page 14)

Fig 2. Core installation
and removal.
5
Install the upper buffer chamber core. First steady the
lower chamber with one hand and then hold the core
with the other hand, position it on the positioning
tabs, and press down, listening for the core to snap
into place. (Alternatively, depress both release tabs at
either side, position the core on the positioning tabs,
press into place, and release the tabs. Check that the
core is secure.)
•
p6
To remove the core,
depress both release
tabs and lift.
To install the core, position it over
the positioning tabs. Then either
press down, listening for the core
to snap into place
—OR—
depress both release tabs, set the
core in place, and release.
Handle
Release tabs (2)
Coolant port (2)