Highgear Axis User Manual
Page 15
ALTIWARE SERIES
TABLE OF CONTENTS
27
english
axis
TABLE OF CONTENTS
28
english
ALTIMETER DATA LOG MEMORY
CLEARING DATA INFORMATION
To Clear the information in the Altitude Data memory,
PRESS
&
HOLD
the
S4
key. The display will
show the word HOLD flashing in the center line of the display with the words CLEAR – ALL in the top
and bottom lines respectively. Continue to hold the
S4
key until DATA 01 appears in the top line along
with 4-dashes in the middle line indicating all data has been cleared from memory.
WHAT ARE LAPS AND SPLITS
The Axis displays both LAP and SPLIT times on screen. A LAP is a
discrete period of time from when the CHRONOGRAPH has started (Lap
1) or since the end of a previous lap. A SPLIT is the cumulative total of all
previous LAPS. Any time an individual lap is timed it also automatically
generates a corresponding split.
OPERATING THE CHRONOGRAPH
TIMING LAPS AND SPLITS
The Axis is capable of timing up to 100 LAPS and SPLITS. These
can be stored in any combination in up to 30 individual Runs or
workouts. While the CHRONOGRAPH is running, the top line will
display the time of the current lap, the middle line will show the time
for the current Split. When the timing of a Lap/Split is initiated the
bottom line will show the number of the Lap/Split for approximately
5-seconds.
The Axis features a sophisticated digital CHRONOGRAPH timing system capable of storing multiple
timed workouts. The chronograph has a resolution of 0.01 seconds and displays both lap time and split
time on screen simultaneously.
CHRONOGRAPH