Highgear Axis - Manual (Page 11)

ALTIWARE SERIES
TABLE OF CONTENTS
19
english
axis
TABLE OF CONTENTS
20
english
BAROMETER BAROMETER
PROGRAMMING STEPS
1. Start in BAROMETER mode.
2.
PRESS & HOLD the S4 key to enter setting the sequence. The
variable you are adjusting will appear in the top line of the display
as a scrolling message.
3. Adjust current weather using the S1 and S2 keys.
NOTE : There are four different icons for weather. SUNNY,
PARTLY CLOUDY, CLOUDY and RAIN. Choose the icon
which most closely matches the weather at the present. The
icon will change to indicate an estimate of what the weather
will be like for the next 6-hours.
4. Advance to setting the barometric pressure using the S3 key.
NOTE: The local barometric pressure Corrected to Mean
Sea Level (CMSL) may be adjusted if desired to achieve the
highest levels of accuracy.
CAUTION: Do not randomly adjust the barometric pressure
setting of the watch. Inaccurate setting of the barometric
pressure may result in inaccurate altimeter and weather
readings.
5. Adjust the SEA LEVEL BAROMETRIC PRESSURE using the S1
and S2 keys.
6. Set and advance from variable to variable using the S3 key.
7. Exit the barometer setting sequence using the S4 key.
The Axis are equipped with a highly sensitive barometer/weather station. The barometer measures the
local Barometric Pressure and calculates the Barometric Pressure corrected to Mean Sea Level (MSL).
Barometric pressure is displayed in Millibar/HectoPascals (mbar/hpa). SECONDARY BAROMETER SCREENS
There are 3 secondary BAROMETER display options accessed by QUICK PRESSES of the S1 key.
SCREEN 1
Top Line:
GRAPH OF BAROMETRIC PRESSURE FOR
THE PAST 24-HOURS
Center Line: BAROMETRIC PRESSURE MSL
Bottom Line: LOCAL UNADJUSTED BAROMETRIC
PRESSURE
SCREEN 3
Top Line:
GRAPH OF BAROMETRIC PRESSURE FOR
THE PAST 24-HOURS
Center Line: BAROMETRIC PRESSURE MSL
Bottom Line: TEMPERATURE
SCREEN 2
Top Line:
GRAPH OF BAROMETRIC PRESSURE FOR
THE PAST 24-HOURS
Center Line: BAROMETRIC PRESSURE MSL
Bottom Line: TIME OF DAY