Highgear AltiTech 1 - Manual (Page 10)

ALTI DATA – Altimeter Data Mode
The Altitech stores Altimeter information you decide to save in the ALTI
DATA mode.
Press B1 until ALTI DATA is displayed. Altitech shows the Date and Time of
the first saved datapoint. To see the altitude information, just wait 2
seconds and the Altitech will display the altitude for that data point. To see
another saved point, use B2 (-) and B3 (+) buttons to scroll through the
dates.
Altitude data cannot be erased individually. To erase all the altitude data,
press and hold B4. Altitech displays CLEAR HOLD and then shows DATA
01 with four lines. Release B4.
After clearing and when no data has been stored in the Altitech, it displays
DATA01 with four lines below.
WELCOME
Congratulations on your purchase of the AltiTech, by
Highgear. The AltiTech is packed with features you’ll want to
use in all your outdoor activities. Please take a few minutes to
setup the AltiTech and familiarize yourself with its features.
Features
• Lightweight and easy to carry. Clips on to you or your gear.
• 9 operation modes: Time (T1), Dual Time (T2), Compass,
Barometer, Altimeter, Altimeter Data, Chronograph, Chronograph
Data and Alarm.
• Altimeter of 1 Foot (or 1meter) resolution and with working range
from –2296 feet (-700 meters) to 29,520 feet (9000 meters).
• Altitude displayed in meters or feet selectable by user.
• 20 altimeter data memories with date, time and altitude reading.
• Barometer of 1 mbar resolution and with working range from 300
mbar to 1100 mbar.
• Weather with weather forecast and temperature.
• Thermometer of 0.1 degree resolution and with working range from
-4 F (-20 C) to 158 F (70 C).
• Temperature displayed in F or C selectable by user.
• Electronic compass with digital direction indication in 16 cardinal
positions together with degree.
• Declination angle adjustable for improved navigation.
• 12/24-hour display formats selectable
• Auto calendar from 2000-2049.
• 1/100-second chronograph with working range up to 24 hours,
with lap and split time selectable.
• 100 lap memories stored in a maximum of 30 runs.
• Each run stores the run number, month, day, lap number, lap/split
times, best lap time and average lap time.
• 2 daily alarms (20 seconds) that can be set to refer to T1 or T2.
• Hourly chime signal, chime “on” with button confirmation sound.
• 3 seconds light up EL back light.
Getting Started
The AltiTech has 8 basic functions and some of these need to be setup before you
can use them. We recommend that you follow the setup directions first for each
function, then come back and familiarize yourself with its operation.
Meet the AltiTech
Hold the AltiTech as shown below. You’ll notice the AltiTech has 4 buttons, 3 gray
and 1 orange. Clockwise from the bottom left, we will refer to them as B1, B2, B3,
and B4.
DATA 01
2-4 12:04
120 ft
DATA 02
2-4 12:2-
270 ft
DATA 03
2-4 12:40
440 ft
DATA 04
2-4 12:55
130 ft
9