Dolby Laboratories 585 - Manual (Page 17)

Model 585 Time Scaling Processor Getting Started
2-7
Caution: Adjusting the pitch shift value or sensitivity level in the main status menu
activates that value change immediately; pressing Enter is not required.
You do not have the option to press Esc to return to the original setting, so
note what that setting is before rotating the knob.
In the Play menu, the knob triggers different functions than in all other menus. See
Knob Function in Play Menu on page 3-4 for details.
2.5 Status Menu
The main status menu, showing the current program configuration and pitch shift
percentage, appears when you turn the power on. At power-up, the status returns to
the configuration that was active at the preceding power-down.
When you press the Status button combination ( Shift + Status ) while in a setup menu,
the display returns to the last status menu displayed within the previous five minutes.
If that is not the main status menu, you can view that menu by pressing
Esc , or the
Status button combination again.
In the main status menu, you can view more information about the current settings by
using the arrow buttons. Press
to view the next choice, or to view the
previous choice. Table 2-2 defines all the status menus.
Table 2-2 Status Menu Screens
Menu Definition
Main Status Shows program configuration and pitch shifting value.
Firmware Version Shows version number of firmware loaded on Model 585.
Digital In Enter to see status of the input signal for each channel pair.
Reference In Shows status of the AES Reference signal.
Note: There is no indication of the condition of the reference or digital input signals
on the front panel or the main status menu. The status of these signals is only
available through the individual status menus.