D-Link DNS-33 - Manual (Page 8)

D-Link DNS-33 User Manual
Section 1 - Product Overview
Power Receptacle:
The 12V 3A / 5V 3A power supply connects here.
Ethernet Port:
A Gigabit Ethernet port that connects the DNS-323 to a network.
USB Port:
USB Print Server port for connecting a USB printer.
Drive Eject Lever:
Use the levers to eject the hard drives. The front panel must be removed before ejecting the drives.
Reset Button:
A pinhole button located beside the Ethernet socket is used to reset the DNS-323 to the factory default settings .
Note: After resetting the unit’s configuration you will still have access to the data on your hard drive(s).
Rear Panel (Connections)
Ethernet Port
Power Receptacle
USB Port
Drive Eject Lever Drive Eject Lever
Reset Button