D-Link DNS-33 User Manual

Page 77

Section 3 - Configuration

After you install the new drive, turn on the DNS-323 and then connect to the Web UI. The DNS-323 will prompt you
to format the new drive.

You will now have two choices for your disk
configuration:

• If you want to configure the new disk as a

separate volume, press the

Next button.

• If you want to configure the new disk in the

DNS-323 to use RAID 1, click the

Reconfigure

to RAID 1 check box and click the Next
button.

Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before
formatting a hard drive.