Groth 1200A - Manual (Page 16)

15
The nameplate on the Valve contains the Model Number, Serial Number, set pressures and flow capacity at a
specified over-pressure. The Model Number contains additional information about materials of construction, soft
goods and options. The following chart will assist in relating the Model Number to the characteristics of your valve:
MODEL SIZE MATERIAL OPTIONS
----- ------
-------------
1200A 02" Pallet Z = Special Options
1220A 03" Seat O = No Specials
1260A 04" Body
1300A 06" S = Spacer
1360A 08" 6 = 411-45 (Note 1) O = No Specials
2300A 10" 7 = Furan
1760A 12" Z = Special
SEAT MATERIAL
B = Buna-N
T = Fluoropolymer
V = FKM
Z = Special
Notes:
1. Epoxy Vinyl Ester Resin 411-45 is standard; 470-36 is available (specify as Z = 470-36 Epoxy Vinyl Ester Resin).
2. Pallet Assemblies include standard Alloy C276 stems unless setting can’t be achieved with a lighter material.
EXAMPLE: 1200A-02-666-TOO indicates a 2" Model 1200A with 411-45 Epoxy Vinyl Ester Resin
body, seat & pallet assembly, Fluoropolymer seat diaphragms, Alloy C276 internal fasteners, 316
SS external fasteners and no special options
.
PRODUCT LIMITED WARRANTY
A. Seller warrants that products which are manufactured
by Seller, are manufactured in accordance with
published specifications and free from defects in
materials and/or workmanship for a period of (12)
twelve months. Seller, at its option, will repair or
replace any products returned intact to the factory,
transportation charges prepaid, which Seller, upon
inspection, shall determine to be defective in material
and/or workmanship. The foregoing shall constitute the
sole remedy for any breach of Seller's warranty.
B. THERE ARE NO UNDERSTANDINGS,
AGREEMENTS, REPRESENTATIONS, OR
WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE REGARDING PRODUCTS)
UNLESS SPECIFIED IN THE SALES CONTRACT .
THIS CONTRACT STATES THE ENTIRE
OBLIGATION OF SELLER.
Seller makes no warranties, either express or implied,
except as provided herein, including
without limitation thereof, warranties as to marketability,
merchantability, for a particular purpose or use, or
against infringement of any patent of products. In no
event shall Seller be liable for any direct, incidental or
consequential damages of any nature, or losses or
expenses resulting from any defective new product or
the use of any such product, including any damages for
loss of time, inconvenience, or loss of use of any such
product.
C. The original Manufacturer shall be solely responsible
for the design, development, supply, production, and
performance of its products hereunder, and the
protection of its trade name or names, if any. It
assumes no responsibility, for products modified or
changed in any way by its agent or customer. Any
such modifications or changes to products sold by
Seller hereunder shall make the product limited
warranty null and void.
D. The Manufacturer shall be under no obligation to
manufacture, sell, or supply, or to continue to
manufacture, sell or supply any of the Products.