System start-up documentation – Greenheck TSU Direct Gas Manual (456857) User Manual
Page 11

11
Job Information
Job Name: ________________________________________
Address: _________________________________________
City: ________________ State: ________ Zip: __________
Phone: __________________ Fax: ____________________
Contact Person: ___________________________________
Service Organization: ______________________________
Address: _________________________________________
City: ________________ State: ________ Zip: __________
Phone: __________________ Fax: ____________________
Work Done By: ____________________________________
Name Plate Information
Min. BTH: _______________ Max. BTH: _______________
Type of Gas:
❏
Natural
❏
L.P.
Minimum _____________ in. wg Maximum ___________
Normal Manifold Pressure ______ in. wg @ Max. Output
Minimum Gas Pressure ________ in. wg for Max. Output
__________ SCFM against an E.S.P. of ________ in. wg
Model: ___________________________________________
Volts: ___________ Hertz: __________ Phase:__________
Amps: __________________ Mark: ___________________
Supply Hp: _____________ Exhaust hp: ______________
Serial Number: ____________________________________
Motor Voltage:
Motor Amperage:
Discharge Temperature Setting
°F
Fan RPM:
Flame Signal
Pilot On
Vdc
Low Fire
Vdc
Mid Fire
Vdc
High Fire
Vdc
System Start-Up Documentation
Maintenance
Date
Time
Notes: (Person calling, problem, contact person, etc.)
Field Start-Up Documentation
Actual Voltage:
Hertz:
Phase:
Actual Amperage:
Gas Pressure:
Inlet
❏
in. wg
❏
PSI
Burner
in. wg
Blower Rotation
❏
Correct
Air Volume
Design
cfm
Actual
cfm
Burner Baffle Opening:
Length
in.
Width
in.
Burner Air Pressure
Differential
in. wg