Greenheck Energy Recovery and Make-Up Air Start-Up Report - Manual (Page 9)

9
Frost Control Application / Operation: Setting Factory Default
Yes No Frost Control set point 5ºF
Differential 2ºF
Timer Refer to IOM
Yes No Frost Control Modulating Refer to IOM
Economizer Application / Operation:
Yes No Economizer (temperature)
Set point
65ºF
Offset 20ºF
Differential 2ºF
Yes No Economizer (enthalpy)
Set point
B
Yes No Economizer (modulating) Refer to IOM
Optional Accessories: Operational
Yes No Wheel Rotation Sensor
( 1 ⁄
8
in. from wheel)
Yes No N/A
Yes No OA Dirty Filter Sensor Yes No N/A
Yes No EA Dirty Filter Sensor Yes No N/A
Yes No CO2 Sensor Yes No N/A
Yes No Service Outlet Yes No N/A
Yes No Vapor Tight Lights Yes No N/A
Yes No Remote Control Panel Yes No N/A
Damper Section: Operational
Yes No Outdoor Air Damper Yes No N/A
Yes No Exhaust Air Damper Yes No N/A
Yes No Night Setback Damper Yes No N/A
Yes No Recirculation Damper Yes No N/A
Indirect Gas Furnace:
Yes No Refer to PVF/PVG Installation, Operation and Maintenance for start-up information.
Outdoor Air Monitoring:
Yes No Field calibrated.
Comments:
Energy Recovery Optional Accessories Checklist