Hard drive, Power off security, Intrusion alert – Dell PowerEdge T610 User Manual
Page 20: Secure mode, Usb peripherals, Battery, Field replaceable units (fru), User accessible jumpers, sockets, and connectors, 12 usb peripherals, 13 battery
Dell
PowerEdge T610 Technical Guide
20
4.11.3 Hard Drive
The front bezel of the system contains a lock which secures the system hard drives.
4.11.4 TPM
The Trusted Platform Module (TPM) is used to generate and store keys, protect and authenticate
passwords, and create and store digital certificates. The TPM can also be used to store Microsoft
®
BitLocker™ keys for hard drive encryption features in Microsoft
®
Windows Server
®
2008. TPM is
enabled through a BIOS option and uses HMAC-SHA1-160 for binding.
4.11.5 Power Off Security
The control panel is designed so the power switch cannot be accidentally activated. The lock on the
bezel secures the switch behind the bezel. In addition, there is a setting in the CMOS setup that
disables the power button function.
4.11.6 Intrusion Alert
A switch mounted on the cooling shroud is used to detect chassis intrusion. When the cover is
opened, the switch circuit closes to indicate intrusion to the iDRAC6. When enabled, the software
can provide notification to the customer that the cover has been opened.
4.11.7 Secure Mode
BIOS has the ability to enter a secure boot mode through Setup. This mode includes the option to
lock out the power and NMI switches on the control panel or set up a system password.
4.12 USB Peripherals
The port on the control panel is for an optional USB key and is located inside the chassis. Some
possible applications of the USB key are listed as follows:
User custom boot and pre-boot OS for ease of deployment or diskless environments
USB license keys for software applications like eToken™ or Sentinel Hardware Keys
Storage of custom logs or scratch pads for portable user defined information (not hot-
swappable)
4.13 Battery
A replaceable coin cell CR2032 3V battery is mounted on the planar to provide backup power for the
Real-Time Clock and CMOS RAM on the ICH chip.
4.14 Field Replaceable Units (FRU)
The planar contains a serial EEPROM to store FRU information including Dell part number, part
revision level, and serial number. The backplane storage enclosure processor (SEP) and the power
supply microcontroller are also used to store FRU data.
4.15 User Accessible Jumpers, Sockets, and Connectors
See the Jumpers and Connectors chapter in the PowerEdge T610 Hardware Owner’s Manual on