Figure 1: connecting the ht502, Table 1: definitions of the ht502 connectors, Table 2: definitions of the ht502 leds – Grandstream HT502 User Manual User Manual
Page 12
FIRMWARE VERSION 1.0.14.1 HT502 USER MANUAL Page 10 of 54
FIGURE 1: CONNECTING THE HT502
The HT502 has two FXS port. Both FXS ports can have a separate SIP account. This is a key feature of
HT502 as it supports simultaneous calls on both FXS ports.
TABLE 1: DEFINITIONS OF THE HT502 CONNECTORS
Power Cable
Power adapter connection
WAN Port (RJ-45)
Connect to the internal LAN network or router.
LAN Port (RJ-45)
Connect the LAN port with an Ethernet cable to your PC.
RESET
Factory Reset button. Press for 7 seconds to reset factory default settings.
PHONE1 (RJ-11)
FXS port to be connected to analog phones / fax machines.
PHONE2 (RJ-11)
FXS port to be connected to analog phones / fax machines.
There are five (5) LED buttons that help you manage the status of your HandyTone.
TABLE 2: DEFINITIONS OF THE HT502 LEDS
LEDs
POWER LED
Indicates Power. Remains ON when power is connected
WAN LED
Indicates LAN (or WAN) port activity
LAN LED
Indicates PC (or LAN) port activity
PHONE1 / PHONE2 LED
Indicate status of the respective FXS Ports-PHONE1 /
PHONE2 on the back panel
Busy
– ON (Solid Green)
HT-502
Back View
RJ-45 Ports
10/100 Mbps
Reset
RJ-11 FXS Ports
(Phone)
Power
Supply
(12V)
HT-502
Front View
Display LEDs
(green)