Grandstream GXV3501 Series User Manual - Manual (Page 25)

GXV3501/GXV3504 Digital Video Server
Firmware 1.0.4.6 Page 25 of 36
Grandstream Networks, Inc. 09/2010
4. Reboot the GXV3501/GXV3504 to begin the firmware upgrade process.
GXV3501/GXV3504 SMTP Page
The SMTP server is used to send out emails when an alarm event or motion detection is
triggered. The SMTP settings must be configured to make sure the alarm email is sent out
properly.
SMTP Server Settings
Enable SMTP – Checked to enable SMTP
SMTP Server – The IP or hostname of the
SMTP server, for example,
smtp.gmail.com.
SMTP Server Port
– The port of the
SMTP server. The GXV3501/GXV3504
supports port 25 and SSL port 465, which
is for SMTP with an encrypted connection.
From E-Mail Address
– The email
address that sends out the alarm email(s).
To E-Mail Address
– The email
addresses that the alarm email(s) will be
sent to. You can have up to 3 emails
configured.
User Name/ Password
– The user name
and password required to log in to your
SMTP server, for example,
[email protected]/123.
SSL
– Checked if the SMTP server requires a secure connection.
Test Email Account Settings – Click the Test button to send a test email from the From
E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get
the test email, then the SMTP settings are ready to go.
GXV3501/GXV3504 FTP Page
The FTP server is used to store video files if you configure the GXV3501/GXV3504 to record
video and upload it to the FTP server when an alarm event or motion detection is triggered.
FTP Settings
Enable FTP – The default setting is “No,” if you want the GXV3501/GXV3504 to upload the
recorded video to the FTP server when an alarm is triggered, set this field to “Yes.”