Grandstream GXV3501 Series User Manual - Manual (Page 24)

GXV3501/GXV3504 Digital Video Server
Firmware 1.0.4.6 Page 24 of 36
Grandstream Networks, Inc. 09/2010
required to login.
Privilege
– The privilege for the user to access to configuration page.
Allow Anonymous Login – If ‘Allow Anonymous Login’ is set to Yes, no user name and
password are required to login to the GXV3501/GXV3504 web configuration pages.
If you login anonymously, you will not be able to change any settings.
GXV3501/GXV3504 Maintenance Page
Server Maintenance
Restart – Click this button to restart the
GXV3501/GXV3504.
Restore
– Click this button to perform a
partial factory reset (The IP address will
not be cleared) .
Firmware Upgrade and Provisioning Items
Upgrade via – This field lets you
choose the firmware upgrade
method. The GXV3501/GXV3504
supports HTTP, HTTPS and TFTP.
Firmware Server Path
– The IP
address or domain name of the
firmware server (the location of the
firmware files) .
Automatic Upgrade Interval
– Enter the frequency (in minutes) in which the
HTTP/HTTPS/TFTP server will be checked for new firmware upgrades or configuration
changes.
Automatic Upgrade
– The default setting is “No.” Choose “Yes” to enable automatic.
HTTP/HTTPS/TFTP upgrade and provisioning. When set to “No”, the IP Camera will only
perform a HTTP/HTTPS/TFTP upgrade and perform a configuration check once during the
boot process.
Performing a firmware upgrade:
1. Download the firmware package from http://www.grandstream.com/firmware.html.
2. Unzip the firmware package and copy the files to the firmware upgrade server
directory.
Upgrades are supported via TFTP, HTTP and HTTPS.
3. Log in to the Maintenance page of the GXV3501/GXV3504. Select the server type
from the dropdown list under the “Upgrade Via” field. Enter your server’s root
directory in the “Firmware Server Path” field.