Accessories – Delta 31-735 User Manual

Page 25

SERVICE AND REPAIRS

All quality tools will eventually require servicing and/or replacement of parts. For information about Delta Machinery, its factory-
owned branches, or an Authorized Warranty Service Center, visit our website at www.deltamachinery.com or call our Customer
Care Center at 1-800-223-7278. All repairs made by our service centers are fully guaranteed against defective material and
workmanship. We cannot guarantee repairs made or attempted by others.

You can also write to us for information at Delta Machinery, 4825 Highway 45 North, Jackson, Tennessee 38305 - Attention:
Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number,
etc.)

A complete line of accessories is available from your Delta Supplier, Porter-Cable

• Delta Factory Service Centers, and

Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of
your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of

such accessories could be hazardous. For safest operation, use only Delta recommended accessories with this
product.

ACCESSORIES

POWER TAKE-OFF SHAFT

1. A power take-off shaft is provided on the lower end of the sanding belt arm.
2. For access to the power take-off shaft, remove the two screws (B) Fig. 71, then remove the cover (C).
3. Fig. 72 shows the power take-off shaft (A).

Unguarded rotating shafts (A) Fig 72 can create an entanglement hazard. ALWAYS cover the

power take-off shaft when not using accessories.

Disconnect the machine from the power source!

Fig. 71

Fig. 72