GAMMA 6004 STRINGING MACHINE 2 POINT SC MOUNTING (Issue 5C - February 2014) - Manual (Page 9)

9
MOUNTING THE FRAME
Special Throat Mounting
Racquets with a bridge that is thinner than the
rest of the frame or are tapered from head to
throat require special mounting to ensure the
frame is not damaged. The white support pads
need to be moved from the inside of the racquet
bridge to the throat of the racquet.
Racquet Hold Down Clamp Operation
With the lever in the up position, insert the
racquet hold down clamp pin into the hole in
the center of the mounting stand. Lower the
hold down clamp until it just makes contact with
the surface of the racquet. Using slight palm
pressure on the hold down clamp depress the
racquet hold down lever completely to secure
the racquet frame to the stand.
BRIDGE
STRINGING THE FRAME
Clamp Base Operation
Rotate the base locking lever clockwise
to secure the clamp base to the turntable.
Reverse the clamping procedure to unlock
the string clamp. The locking lever is spring
loaded to assist the unlocking of the clamp
base.
The locking lever should be tightened enough
to prevent clamp base slippage on the turn-
table, when the desired tension is placed on
the string. To go from the loose position to
the clamped position and back, generally
requires the travel permitted by the clamp base. If the travel is not suffi cient to allow smooth
operation adjust the clamp base as outlined on page 16.