GAMMA 6004 STRINGING MACHINE 2 POINT SC MOUNTING (Issue 5C - February 2014) - Manual (Page 12)

12
STRINGING THE FRAME
ADDITIONAL FEATURES
Locking the Turntable
The turntable may be locked in any position.
Rotate the lever down to lock the turntable
and up to release the turntable.
Clamping the First Main String
Secure the tensioned main string using the
remaining fi xed clamp. Repeat the procedure
for all of the remaining main strings and
tie off following the racquet manufacturers
recommendations.
Follow the manufacturer’s recommended
stringing pattern for one or two piece
stringing. This will determine the starting
point for the cross strings. If applicable, tie
the fi rst cross string using an appropriate
starting knot.
Weaving the Cross Strings
Weave the cross strings over and under the
main strings being careful to alternate the
weave direction of each consecutive cross
string so as to be opposite of the previously
installed cross string.
Once the fi nal cross string is tensioned
and clamped, tie off at the appropriate hole
specifi ed by the racquet manufacturer. Re-
move the frame from the mounting system
by releasing the racquet holddowns and
loosening the mounting stands.