D-Link DCM-202 - Manual (Page 18)

18
Installing the Hardware (Cable Modem and Power
Adapter) continued
6 Plug the cable modem’s power adapter into the cable modem’s power jack
and into a grounded electrical outlet or surge protector that is plugged into
a grounded electrical outlet.
7 You must now install the software drivers provided on the Installation CD.
Be sure to follow the instructions (below) for your specific operating
system.
8 Plug in the computer (and television).
Installing the Software Drivers
After installing the hardware, use the software driver installation procedure
for your computer’s operating system.
Installing the Software Drivers (Windows 98 OS)
After installing the hardware, the Found New Hardware screen appears,
followed by the Add New Hardware Wizard screen.
1 Select Specify the location of the driver (Advanced) and click Next.