Desa Mgh3000 - Manual (Page 15)

15
GENERATOR
GROUNDING
WARNING
You must properly earth-ground generator before
starting. This will help guard against deadly electric
shock. Only use grounded plugs with generator.
Only use grounded extension cords. Only use three-
wire or double-insulated power tools.
Grounding generator helps prevent electric shock from a ground fault condition.
Locate ground lug on end of generator housing (see Figure 12). Attach a #10
stranded-copper ground wire to ground lug. Drive grounding point into ground.
Grounding point can be a stake, grounding rod, or pipe. Grounding point should be
copper or brass. Attach ground wire to grounding point. You must supply the
ground wire and grounding point. They do not come with generator. Follow the
National Electrical Code and all state and local codes. Consult your power com-
pany or a licensed electrician.
WARNING
For a grounding point, do not use metal pipe being
used to carry combustible materials or gases.
FUEL F
Ground Lug
Ground Wire
Alternator
Copper or Brass
Grounding Point
Figure 12 - Grounding Generator (Model MGH4000A Shown)