Fulgor Milano SPO 6213 - Manual (Page 13)

GB
11
Introduction to the oven
Dear Customer, your new oven is controlled by an electronic board that constantly
monitors its operation to improve its performance.
The touch controls are state-of-the-art, precise and reliable.
The interface is elegant, orderly and discrete, more intuitive than ever!
A few buttons, many functions and no combination or sequence is difficult to enter, so
you can concentrate on following the recipe and the oven is ready in two clicks!
Installation and hook-up
Dear Customer, this oven is a sophisticated electronic appliance, classified as a durable
good. Its installation requires qualified professionals for both the hook-up of the power
line and itsplacement in the kitchen counter.
Before hook-up
When the oven is connected to the electric mains for the first time, the display will ask you
to select your language;use the buttons
to select the language you want;
use the button to confirm the choice;
ITALIANO
ENGLISH
DEUTSCH
FRANCAISE
ENSPAÑOL
NEDERLANDS
PORTUGUÊS
POLSKI
(from now on, the language choice will remain fixed even when their are power
outages).
Now, it goes into demonstration mode.
Demonstration mode
This is the mode that the oven is normally in every time that there is a power failure and,
consequently, when it is first hooked-up:
the purpose is to show how you can control it with a recorded sequence of commands.
In this mode, the oven is never REALLY turned on, i.e., the heating elements are
never powered!
The control panel is INACTIVE and, so, the oven will not respond to commands!