Freecom DVB T USB STICK - Manual (Page 28)

28
Freecom DVB-T USB Stick
GB
4
4.4 More Functions
Mute display : When you click “Mute” button, will light up on the control panel.
Signal display : In the setting menu “ General” , choose (refresh RF information). Move
the cursor to , then you can see the signal receiving in motion. But it’s very
power consuming. We do not suggest using it if the battery is not enough in the system.
Warning ! This selection will affect some quality and function.
Don’t use it under normal circumstance. We suggest that you
turn off this function after executing the “Refresh RF informa-
tion”
Recording display: When you start real-time or scheduling recording, the on the
control panel will turn red.
Program channel display :
on the control panel will indicates the channel of on-going playing or recording
program.
Source of display : When digital broadcasting program is playing , the control panel will
indicate its source as following
. If it’s playing the recorded or selected
image, the control panel will indicate the file name or status as following .
Volume display : When you adjust the volume, the volume icon will change
accordingly .
Electronic Program Menu : You may enter the program menu by choosing
on the control panel. You will receive the information of channel programs such as
programs schedule and introductions of the programs. (This function is provided by the
channel provider). You may double click on a “channel schedule” and scheduling
recording setup window will pop out.