Freecom Mobile Drive Classic II Turbo USB - Manual

FREECOM MOBILE HARD DRIVE
FREECOM DESKTOP HARD DRIVE
Chapter: Using Freecom Turbo USB .0 (only PC)
By installing the Turbo USB 2.0 driver for your Freecom Mobile Hard Drive / Desktop Hard
Drive, the data transfer rate can be significantly increased (up to 40% faster transfer speed
compared to standard High-Speed USB).
Enabling the Turbo USB .0 driver
1. Connect the Freecom Mobile Hard Drive / Desktop Hard Drive to your PC.
2. Run "Start PC.exe" from your Freecom Mobile Hard Drive / Desktop Hard Drive and
go to "Software Installation" -> "Turbo USB 2.0".
3. The Freecom Turbo USB 2.0 Wizard will open.
4. Check the drive and click on "Configure" to enable the Turbo USB2.0 driver for the
Freecom Mobile Hard Drive / Desktop Hard Drive.
Disabling the Turbo USB .0 driver
1. Connect the Freecom Mobile Hard Drive / Desktop Hard Drive to your PC.
2. Run "Start PC.exe" from your Freecom Mobile Hard Drive / Desktop Hard Drive and
go to "Software Installation" -> "Turbo USB 2.0".
3. The Freecom Turbo USB 2.0 Wizard will open. Uncheck the drive and click on "Configure"
to disable the Freecom Turbo USB 2.0 driver for the Freecom Mobile Hard Drive / Desktop
Hard Drive.
EN
TURBO