Foxconn G31MG Series - Manual (Page 27)

20
3
enter bIoS Setup
The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press to enter Setup, to boot menu" appears at the bottom
of the screen, you can press key to enter SETUP.
Main Menu
The main menu allows you to select from a list of setup functions together with two exit choices.
Use the arrow keys to select a specific item and press to go to the submenu.
Each item in the main menu is explained below:
► System Information
It displays the basic system configuration, such as BIOS version, system date and time. They all
can be seen or set up through this menu.
► Fox Central Control Unit
Some special proprietary features (such as overclocking) can be set up through this menu.
► Advanced BIOS Features
The advanced system features can be set up through this menu.
► Advanced Chipset Features
The values for the chipset can be changed through this menu, and the system performance can
be optimized.
► Integrated Peripherals
All onboard peripherals can be set up through this menu. There are IDE devices, Super I/O
devices such as Serial I/O and other USB devices... etc.
Phoenix - AwardBIOS CMOS Setup Utility
► System Information ► Green System Mode
► Fox Central Control Unit ► BIOS Security Features
► Advanced BIOS Features Load Optimized Defaults
► Advanced Chipset Features
Save & Exit Setup
► Integrated Peripherals
Exit Without Saving
Esc : Quit ↑↓→← : Select Item
F10 : Save & Exit Setup
Time, Date, Hard Disk Type...
► System Information
We do not suggest that you change the default values in the BIOS Setup, and we shall
not be responsible for any damage which resulted from the change you made.
C
A
U
T
IO
N
!