Foxconn G31MG Series User Manual
Page 26
This chapter tells how to change system settings through the BIOS
Setup menus. Detailed descriptions of the BIOS parameters are also
provided.
You have to run the Setup Program when the following cases
occur:
1. An error message appears on the screen during the system
Power On Self Test (POST) process.
2. You want to change the default CMOS settings.
This chapter includes the following information :
■ Enter BIOS Setup
■ Main Menu
■ System Information
■ Fox Central Control Unit
■ Advanced BIOS Features
■ Advanced Chipset Features
■ Integrated Peripherals
■ Green System Mode
■ BIOS Security Features
■ Load Optimized Defaults
■ Save & Exit Setup
■ Exit Without Saving
Since BIOS could be updated some other times, the BIOS information described
in this manual is for reference only. We do not guarantee the content of this
manual will remain consistent with the newly released BIOS at any given time in
the future. Please visit our website for updated manual if it is available.