beautypg.com

Installation, Continued, Stove cavity assembly – Desa SVYD18NRA/PRA SERIES User Manual

Page 9: Front of stove unit

background image

www.desatech.com

113084-01A

9

6"

Minimum

48"

Minimum

Ceiling

Floor

Back

Wall

INSTALLATION

Continued

Figure 4 - Minimum Clearance to Walls

and Ceiling (Stove May Vary Depending

on Model)

Top View

Side

View

Front of
Stove Unit

12"

Minimum

12"

Minimum

48"

Minimum

Ceiling

Side
Wall

Side
Wall

Back Wall

Side Wall

Side Wall

12 "

Minimum

12 "

Minimum

6 "

Minimum

Corner

Wall

Wall

6

"

Minimum

6

"

Minimum

Front of
Stove Unit

Front

View

STOVE CAVITY ASSEMBLY

1.

Lift off corrugated box enclosing stove body
crating.

2.

Remove all screws fastening the wood frame
enclosure. Spread wood frame open and lift
away from plastic-bagged stove body. The
bottom pieces of pallet wood will remain
bolted to the stove body.

3.

Remove plastic bag from stove body.

4.

Remove all contents from inside stove cavity.
Contents include:

(4) - Legs (include leg leveler bolts)

(1) - Bottom door

(3) - Top grates

(1) - Hardware kit bag with fasteners

5.

Carefully lay stove body on back to attach
bottom components to stove body (see Fig-
ure 5). Rest stove on drop cloth or blanket to
avoid scratching stove edges.

6.

Remove remaining pallet wood attached to bot-
tom of stove body (see Figure 6). Use an adjust-
able wrench or 12mm socket to remove bolts.

7.

Fasten each leg to stove with four (4) M8 x
1.25 - 20mm bolts. Use a flat washer and lock
washer with each bolt. Tighten bolts into
threaded holes on stove body (see Figures 7
and 8, page 10). Use an adjustable wrench or
a 12mm socket.

8.

Attach stove door by inserting step bolt
through door hinge pivot hole and into
threaded hole in stove body (see Figure 7 and
Figure 10, page 10). Use an adjustable wrench
or a 12mm socket to fasten step bolt. Tighten
step bolt until snug. Make sure door moves
freely.

Figure 5 - Laying Down Stove On Side

(Stove Style May Vary Depending on

Model)

Front of
Stove
Unit

Drop
Cloth/
Blanket

Pallet Wood Bolted to
Stove Body Bottom

Top of
Stove Unit

Front of
Stove Unit

Top of
Stove
Unit

Figure 6 - Removing Pallet Wood From

The Bottom of The Stove

Pallet Wood

Bolt

Pallet
Wood

Bottom
Of Stove
Unit

Front