Foxconn D42S - Manual (Page 43)

36
3
load optimal Defaults
Optimal defaults are the best settings of this motherboard. Always load
the Optimal defaults after updating the BIOS or after clearing the CMOS
values.
Select this option and press Enter, it will pop out a dialogue box to let
you load the defaults. Select and then press to load the
defaults. Select and press , it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the
performances of system components. But if the optimal performance parameters to be set cannot
be supported by your hardware devices (for example, too many expansion cards were installed),
the system might fail to work.
Save & Exit Setup
When you select this option and press , a message
will be displayed in the center of the screen:
Select [OK] to save your changes to CMOS and exit the
program, select [Cancel] or to return to the main
menu.
Exit Without Saving
If you select this option and press , the following message
will be displayed in the center of the screen:
Select [OK] to exit CMOS without saving your modifications,
select [Cancel] or to return to the main menu.
Save configuration changes and exit setup?
[OK] [Cancel] [OK]
Discard changes and exit setup?
[OK] [Cancel] [OK]
Load Optimal Defaults?
[OK] [Cancel] [OK]