Foxconn D42S User Manual

Page 40

► ACPI Suspend Type

This item is used to set the energy saving mode of the ACPI function. When you select “S1
(POS)” mode, the power is always on and computer can be resumed at any time. When
you select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.

► PWR On after Power Fail

This item is used to set which state the PC will take with when it resumes after an AC power
loss.

► Resume by LAN

This item is used to enable/disable the LAN device to generate a wake up.

► Resume by Ring

This item is used to enable/disable the modem of serial port to generate a wake up from an
ACPI sleep state.

► Resume by PME

This item is used to enable/disable a PCI device to generate a wake up.

► Resume by USB Devices

This item is used to enable/disable the USB keyboard and mouse to generate a wake up.

to generate a wake up.

► Resume by PS� Keyboard

This item is used to enable/disable the PS2 keyboard to generate a wake up.

the PS2 keyboard to generate a wake up.

generate a wake up.

► Resume by PS� Mouse

This item is used to enable/disable the PS2 mouse to generate a wake up.

► Resume by RTC

This item is used to enable/disable RTC alarm event to generate a wake up.
RTC is system real time clock.

► RTC Alarm Date(Days)

�hen Resume by RTC is enabled, select a specific date to generate a wake up.

► RTC Alarm Time (HH : MM : SS)

�hen Resume by RTC is enabled, select a specific time to generate a wake up.

This manual is related to the following products:

D52S