Integrated peripherals, Ide configuration – Foxconn D42S User Manual
Page 35
28
3
Integrated Peripherals
► IDE Configuration / OnBoard Configuration / SuperIO Configuration / USB Configuration
OnBoard Configuration / SuperIO Configuration / USB Configuration
/ SuperIO Configuration / USB Configuration
Configuration / USB Configuration
/ USB Configuration
Press
IDE Configuration
► SATA Controller
This item allows you to select the mode of the SATA ports. Setting values are: [Compatible],
[Enhanced].
► Configure SATA as
This item allows you to set the operation mode of the SATA ports. Setting values are: [IDE],
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Integrated Peripherals
► IDE Configuration
► IDE Configuration
[Press Enter]
Help Item
► OnBoard Configuration
► OnBoard Configuration
[Press Enter]
► SuperIO Configuration
► SuperIO Configuration
[Press Enter]
Configure the IDE
► USB Configuration
► USB Configuration
[Press Enter]
device(s) .
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
IDE Configuration
IDE Configuration
IDE Configuration
Help Item
SATA Controller
[Enhanced]
Configure SATA as
[IDE]
Compatible
Enhanced
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enhanced]
Options