Pc health status – Foxconn 45CSX User Manual
Page 38
31
3
PC Health Status
► Shut Down Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► CPU/System Temperature
The CPU/System temperature are automatically detected and displayed by the system.
► System Fan Speed
The System fan speed are automatically detected and displayed by the system.
► CPU Core/DRAM Voltage/+ 3.30V/+5.00V/+12.0V
The current voltages are automatically detected and displayed by the system.
► System Smart Fan Function
This option is used to enable or disable smart fan function.
► Fan Off Temperature
It allows you set a temperature value from which smart fan stops its operation.
► PWM Start Temperature
It allows you set a temperature value from which smart fan starts its operation.
► Start PWM Value
It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
value and smart fan begins its operation. The higher PWM value can achieve the faster fan
speed.
► Slope PWM Value
The slope controls the PWM value being stepped up or down versus temperature changes.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
PC Health Status
Shut Down Temperature
[Disabled]
Help Item
CPU Temperature
:56
o
C/132
o
F
System Temperature
:40
o
C/104
o
F
System Fan Speed
:N/A
Disabled
50
o
C/122
o
F
CPU Core
:1.136 V
55
o
C/131
o
F
DRAM Voltage
:1.760 V
60
o
C/140
o
F
+3.30V
:3.376 V
65
o
C/149
o
F
+5.00V
:5.107 V
70
o
C/158
o
F
+12.0V
:12.096 V
75
o
C/167
o
F
System Smart Fan Function
[Disabled]
80
o
C/176
o
F
85
o
C/185
o
F
90
o
C/194
o
F
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Disabled]
Options