Onboard configuration, Superio configuration – Foxconn 45CSX User Manual
Page 34
27
3
OnBoard Configuration
► OnBoard Audio Controller
This item is used to enable or disable the onboard audio controller.
► OnBoard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.
SuperIO Configuration
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
OnBoard Configuration
OnBoard Configuration
Help Item
OnBoard Audio Controller
[Enabled]
OnBoard LAN Controller
[Enabled]
OnBoard LAN Boot ROM
[Disabled]
Enabled
Disabled
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enabled]
Options
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
SuperIO Configuration
Configure ITE8718 Super IO Chipset
Help Item
Serial Port1 Address
[3F8/IRQ4]
Allows BIOS to Select
Serial IRDA Address
[2F8/IRQ3]
Serial Port1 Base
IRDA Port Duplex Mode
[Half Duplex]
Addresses.
Parallel Port Address
[378]
Parallel Port Mode
[Normal]
Parallel Port IRQ
[IRQ7]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[3F8/IRQ4]