Foxconn M61PMX - Manual (Page 72)

5
65
5-2 RAID enable in bIoS
1. Enter the BIOS setup by pressing key when boot up.
2. Select the “Standard CMOS Features” from the “Main menu”, then select the
“Configure SATA as” menu and press to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press to save the setting then PC will reboot itself.
5-3 Select a RAID Array for Use
When BIOS is restarted, it will display a message asking you to press [F10] key to
enter the main menu of MediaShield BIOS. Press [F10], the screen appears.
At the bottom of each screen displayed, there is one line listing each key’s function,
such as , , ...etc. It is helpful to make your choice easier.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Wed, Mar 12 2008 Item Help
Time (hh:mm:ss) 18 : 30 : 59
Menu Level ►
► Primary Master [ None] Chage the day,month
► Primary Slave [None] year and century
► SATA Port 1 [ST3160815AS]
► SATA Port 2 [TSSTcorp CDDVDW TS-H]
Driver A [ 1.4MM,3.5 in]
Halt On [All , But Keyboard]
Configure SATA as [RAID]
Install Memory 2048MB
Memory Speed 800 MHz
BIOS ID MCP61M01.02.F1.D.03
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Setup Defaults
MediaShield Utility Aug 21 2006
- Define a New Array -
RAID Mode: Mirrored Stripe Block: Optimal
Free Disks Array Disks
Port Disk Model Capacity Port Disk Model Capacity
[+] Add
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup
Optimal
0.0 WDC WD1200JD-9 111.79GB
1.0 Hitachi HDT725 232.88GB
Mirroring
1.1 ST3320620AS 298.09GB