Foxconn M61PMX - Manual (Page 33)

3
26
Integrated Peripherals
► USB Functions
This item is used to enable or disable the USB controller.
► Legacy USB support
This item is used to enable the support devices on legacy OS.If you have a USB keyboard or
mouse, set to auto or enable.
► HD Audio Controoller
This item is used to enable or disable the HD Audio Controller.
► Onboard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Option ROM
This item is used to enable or disable the onboard LAN option optional ROM. A LAN option
ROM lets you set up a diskless workstation on the network. By installing a option ROM in the
network board, you can enable a client PC system on the network to be booted remotely.
► Onboard FDC Controller
This item is used to enabled FDC controller.
► Onboard Serial Port 1
This item is used to assign the I/O address and interrupt request(IRQ) for the onboard serial
port 1.
►Onboard Parallel Port
This item is used to assign the I/O address and interrupt request(IRQ) for the onboard parallel
port.
► Parallel Port Mode
This item is used to set parallel port mode.
► ECP Mode Use DMA
When the Parallel Port Mode is set to ECP or ECP+ EPP, this option is used to select the
channel for the ECP mode.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
USB Functions [Enabled ] Item Help
Legacy USB support [Enabled]
HD Audio Controller [Enabled] Menu Level ►
Onboard LAN controller [Enabled]
Onboard LAN Option ROM [Enabled]
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Setup Defaults
Enabled