Foxconn M61PMX - Manual (Page 68)

5
61
NVIDIA ® MediaShield Driver
The NVIDIA ® MediaShield driver supports RAID 0, RAID 1, RAID 5, and RAID 0+1
functions. It allows you to get high performance with fault tolerance, big capacity, or
data safety provided by different RAID functions.
Here, we will use Two SATA hard disks as an example to guide you how to select your
RAID system. Assume Two hard disks are connected to the motherboard :
SATA port 1 - Hitachi HDT725, 232.88GB
SATA port 2 - ST3320620AS, 298.09GB
The relationships between RAID settings and SATA ports on the motherboard are :
SATA Pri-Master RAID is the SATA port 1 of the motherboard.
SATA Pri-Slave RAID is the SATA port 2.
To achieve the best performance and reliability, we highly recommend you
using the hard disks with the same brand, size and model number. Though
we are using four different hard disks as an example to describe RAID
function in this chapter, it is only helpful in explaining what the final disk
volume of the RAID array will be. In the real world, using the same model to
build a disk array is strongly recommended.
WA
RNING!
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Wed, Mar 12 2008 Item Help
Time (hh:mm:ss) 18 : 30 : 59
Menu Level ►
► Primary Master [ None] Chage the day,month
► Primary Slave [None] year and century
► SATA Port 1 [ST3160815AS]
► SATA Port 2 [TSSTcorp CDDVDW TS-H]
Driver A [ 1.4MM,3.5 in]
Halt On [All , But Keyboard]
Configure SATA as [RAID]
Install Memory 2048MB
Memory Speed 800 MHz
BIOS ID MCP61M01.02.F1.D.03
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Setup Defaults